MachineWise Slift v2 v1
Overview
[edit | edit source]The Slift v2 v1 is a Construction#Channel titanium balisong made by MachineWise.
Description
[edit | edit source]In its closed position, it is 14,8cm long.
In its open position, it is 26,2cm long.
Without the weights installed, it is ?g
Handle
[edit | edit source]Handle Design
[edit | edit source]The Slift v2 v1 uses a Construction#Channel design, with Pin_System#Press-fit zen pins.
Handle Dimension
[edit | edit source]Most Slift v2 v2 have a speed channel. The faces have three chamfered cutouts which get increasingly wider and longer towards the end of the handle. The shortest cutout is 3.3cm long and 5,0-5,8mm wide. The middle cutout is 3,41cm long and 6-6.8mm wide. The last cutout located near the end of the handles is 3,5cm long and 6.9-7,7mm wide
The speedchannel has a length of 9.62cm and is 5mm wide all across.
The handles have a face to face thickness of 12.875mm
The handles are tapered and are 9.860mm wide near the pivots and 12.673mm wide near the end.
Handle Weight
[edit | edit source]One handle with no weights, but with the zen pin installed, weighs 39g.
Blade Design
[edit | edit source]Blade Dimensions
[edit | edit source]Blade Steel
[edit | edit source]Slift v2 v1 has AEB-L blade steel.
Blade Weight
[edit | edit source]Balance
[edit | edit source]Hardware
[edit | edit source]History
[edit | edit source]The Slift v2 v1 released in late December of 2022 and was discontinued in ?.
It is based on the Slift v1.
Difference
[edit | edit source]The Jimping on the faces have been removed.